Cisco 700 series Podręcznik dla początkujących - Strona 7

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Serwer Cisco 700 series. Cisco 700 series 27 stron. Using profiles
Również dla Cisco 700 series: Skrócona instrukcja obsługi (8 strony), Przegląd (19 strony), Podręcznik użytkownika (9 strony), Podręcznik administracyjny (36 strony)

The Controller Discovery Process

The access point uses standard Control and Provisioning of Wireless Access Points Protocol (CAPWAP) to communicate

between the controller and other wireless access points on the network. CAPWAP is a standard, interoperable protocol which

enables an access controller to manage a collection of wireless termination points. The discovery process using CAPWAP is

identical to the Lightweight Access Point Protocol (LWAPP) used with previous Cisco Aironet access points. LWAPP-enabled

access points are compatible with CAPWAP, and conversion to a CAPWAP controller is seamless. Deployments can combine

CAPWAP and LWAPP software on the controllers.

The functionality provided by the controller does not change except for customers who have Layer 2 deployments, which

CAPWAP does not support.

In a CAPWAP environment, a wireless access point discovers a controller by using CAPWAP discovery mechanisms and then

sends it a CAPWAP join request. The controller sends the access point a CAPWAP join response allowing the access point to

join the controller. When the access point joins the controller, the controller manages its configuration, firmware, control

transactions, and data transactions.

Note

For additional information about the discovery process and CAPWAP, see the Cisco Wireless LAN Controller Software

Configuration Guide. This document is available on Cisco.com.

CAPWAP support is provided in controller software release 5.2 or later. However, your controller must be running

Note

release 7.5.x.x or later to support 700 series access points.

Note

You cannot edit or query any access point using the controller CLI if the name of the access point contains a space.

Make sure that the controller is set to the current time. If the controller is set to a time that has already occurred, the

Note

access point might not join the controller because its certificate may not be valid for that time.

Access points must discovered a controller before they can become an active part of the network. The access point supports

these controller discovery processes:

• Layer 3 CAPWAP discovery—The access point performs a local broadcast (255.255.255.255) discovery request to find any

contollers on the same subnet/vlan. The request can be forwarded to other networks by the IP helper featuer that is present

on switches and router.

• Locally stored controller IP address discovery—If the access point was previously joined to a controller, the IP addresses of

the primary, secondary, and tertiary controllers are stored in the access point's non-volatile memory. This process of storing

controller IP addresses on an access point for later deployment is called priming the access point. For more information

about priming, see the

• DHCP server discovery—This feature uses DHCP option 43 to provide controller IP addresses to the access points. Cisco

switches support a DHCP server option that is typically used for this capability. For more information about DHCP option

43, see the

"Configuring DHCP Option 43 and DHCP Option 60" section on page

• DNS discovery—The access point can discover controllers through your domain name server (DNS). For the access point

to do so, you must configure your DNS to return controller IP addresses in response to

CISCO-CAPWAP-CONTROLLER.localdomain, where localdomain is the access point domain name. Configuring the

CISCO-CAPWAP-CONTROLLER provides backwards compatibility in an existing customer deployment. When an access

point receives an IP address and DNS information from a DHCP server, it contacts the DNS to resolve

CISCO-CAPWAP-CONTROLLER.localdomain. When the DNS sends a list of controller IP addresses, the access point

sends discovery requests to the controllers.

"Performing a Pre-Installation Configuration" section on page

23.