Cisco 7513 Series Podręcznik - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik dla Serwer Cisco 7513 Series. Cisco 7513 Series 30 stron. Chassis replacement
Również dla Cisco 7513 Series: Skrócona instrukcja obsługi (44 strony), Instrukcja wymiany (26 strony), Arkusz danych (11 strony), Utrzymanie (20 strony), Instrukcja wymiany (19 strony), Instrukcja wymiany (22 strony)

Figure 4

19 in. required

for blower removal

Tools and Parts Required

This section lists the tools and parts you will need to complete these replacement procedures. Have

the necessary tools on hand so that you can complete the replacement without interruption:

•

To replace the chassis cover, you need a 3/16-inch, ﬂat-blade screwdriver to loosen the captive

screws on the chassis cover panel

•

To install a replacement chassis, you need a number 1 phillips and a 3/16-inch, ﬂat-blade

screwdriver for the captive installation screws on the processor modules (most of the carriers use

slotted screws, but some use phillips screws)

•

To install a new cable-management bracket or to move the bracket from the existing chassis, you

need the following tools and parts (pan head screws are included with the brackets):

— Number 1 phillips screwdriver

— Cable-management bracket

— Two M3 x 8-mm, phillips pan head screws

Chassis Footprint and Clearance Requirements for Maintenance

1.75 in. 4 places

18.93

in.

Cisco 7513 and Cisco 7576 Chassis Replacement and Upgrade Instructions

3.94 in.

12.73 in.

18.75

in.

21.23

in.

Tools and Parts Required

1.47

Plastic front

in.

panel end

14.57

in.

17.50

in.