Cisco 7513 Series Instrukcja wymiany - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja wymiany dla Serwer Cisco 7513 Series. Cisco 7513 Series 22 stron. Chassis replacement
Również dla Cisco 7513 Series: Skrócona instrukcja obsługi (44 strony), Instrukcja wymiany (26 strony), Arkusz danych (11 strony), Podręcznik (30 strony), Utrzymanie (20 strony), Instrukcja wymiany (19 strony)

What Is the Cisco 7513?

The Cisco 7513 is a 13-slot router chassis, which uses the RSP2 and CxBus and CyBus interface

processors. The chassis provides up to eleven interface processor slots. Although the chassis uses

two high-speed, 1.067-gigabit-per-second (Gbps) CyBuses, it can accommodate all CxBus-based

interface processors.

Any combination of network interface types is supported: Ethernet, Token Ring, Fiber Distributed

Data Interface (FDDI), channel attachment, multichannel, serial, and so forth. The RSP2 and

interface processors are keyed with guides on the backplane to prevent them from being fully

inserted in the wrong slot.

Figure 1 shows the interface processor end of the Cisco 7513, which provides access to the thirteen

slots, the system blower, and the power supplies. When facing the interface processor end of the

chassis, the RSP2 is installed in RSP slot 6 or 7.

The eleven interface processor slots are numbered from slot 0 (far left) through slot 5 (CyBus 0) and

slot 8 through slot 12 (CyBus 1).

Figure 1

Cable-management

processor modules

Chassis grounding

2 Cisco 7513 Chassis Replacement Instructions

Cisco 7513—Interface Processor End

Blower module

bracket

Card cage and

Air intake vent

Power supplies

POW ER

receptacle (2)

POW ER