Cisco C800 Series Dodatkowa instrukcja serwisowa - Strona 7

Przeglądaj online lub pobierz pdf Dodatkowa instrukcja serwisowa dla Serwer Cisco C800 Series. Cisco C800 Series 27 stron. M4 storage subsystem

3.Important Notes

3. Important Notes

This chapter provides safety instructions which you must observe when handling your storage subsystem.

The device complies with the relevant safety regulations for data processing equipment.

The following safety instructions can also be found in the manual entitled "Safety notes and other

important information". Please also read the notes in the operating manual for the attached system.

If you have any questions on setting up and operating the device in your particular environment, please

contact your sales outlet or one of our Service Desks.

ATTENTION!

● The activities described in this manual may only be performed by specialist technical personnel.

Equipment repairs must only be performed by service staff. Any unauthorized opening or improper

repairs could endanger the user (through electric shock, energy hazard, fire hazard) or damage

the equipment. Please note that any unauthorized opening of the device will result in the

invalidation of the warranty and exclusion from all liability.

● Transport the device only in its original packaging or in packaging which protects it from knocks

and jolts.

● If the device is brought in from a cold environment, condensation may form both inside and on the

outside of the machine. Before operating the device, wait until it is dry and has reached

approximately the same temperature as the installation site. Failure to observe these guidelines

can lead to material damage of the device.

● Check that the rated voltage specified on the device's ID plate is the same as the local mains

voltage.

● Only connect the device to a properly grounded wall outlet (the device is fitted with a tested and

approved power cable).