Epson CX5000 - Stylus Color Inkjet Podręcznik - Strona 16
Przeglądaj online lub pobierz pdf Podręcznik dla Skaner Epson CX5000 - Stylus Color Inkjet. Epson CX5000 - Stylus Color Inkjet 19 stron. Epson scan icm updater v1.20 (psb.2008.07.001)
Również dla Epson CX5000 - Stylus Color Inkjet: Podręcznik Start Here (8 strony), Podręcznik Start Here (8 strony), Aktualizacja (1 strony), Skrócona instrukcja obsługi (4 strony)
Drukuj stronę
Epson Stylus CX5000 Series
Aligning the Print Head
If your printouts look grainy or blurry, or you see light or dark
horizontal banding, you may need to align the print head.
Note:
Banding may also occur if your cartridges are low on ink or you need
to clean the print head.
1. Turn on the CX5000 Series.
2. Load several sheets of paper.
3. Windows: Right-click the
(in the lower right corner of your screen). Select
.
Alignment
Macintosh OS X: Open the
. Select your
EPSON Print Utility
printer list, click
, and select
OK
4. Follow the instructions on the screen to print a vertical
alignment sheet. You see a window like this one:
5. Look at the five sets of patterns in your printout. For each
set, if you see a pattern with no visible vertical lines, enter its
number in the corresponding box on the screen and click
.
Next
If you can't find an aligned pattern, choose the one that's
closest to being aligned. Click
to print another alignment sheet and repeat this step.
16
printer icon on your taskbar
Print Head
folder and select
Applications
in the
CX5000 Series
Print Head Alignment
and then
Realignment
Print
6. Click
to print a black horizontal alignment sheet.
Print
After it's printed, you see a window like this one:
7. Look at the printout and select the pattern with no gap or
.
line between the rectangles. Enter the number for that
pattern in the box on the screen and click
If you can't find an aligned pattern, choose the one that
looks the best. Then click
alignment sheet and repeat this step.
8. Click
to print a color horizontal alignment sheet.
Print
After it's printed, you see a window like this one:
9. Look at the printout and find the pattern with no gap or
line between the rectangles and enter its number in the box
on the screen.
If you can't find an aligned pattern, choose the one that
looks the best. Then click
alignment sheet and repeat this step.
10. Click
Finish
6/06
Realignment
Realignment
to close the Print Head Alignment Utility.
.
Next
to print another
to print another