Cisco Firepower 2130 Pierwsze kroki - Strona 22

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Serwer Cisco Firepower 2130. Cisco Firepower 2130 42 stron. Rack-mount and ground the chassis
Również dla Cisco Firepower 2130: Podręcznik (12 strony), Podręcznik wdrażania (8 strony), Instalacja i konserwacja (26 strony)

Drukuj stronę

(Optional) Change Management Network Settings at the CLI

• Enter the IPv4 default gateway for the management interface—If you set a manual IP address, enter

either data-interfaces or the IP address of the gateway router. The data-interfaces setting sends outbound

management traffic over the backplane to exit a data interface. This setting is useful if you do not have

a separate Management network that can access the internet. Traffic originating on the Management

interface includes license registration and database updates that require internet access. If you use

data-interfaces, you can still use the FDM (or SSH) on the Management interface if you are

directly-connected to the Management network, but for remote management for specific networks or

hosts, you should add a static route using the configure network static-routes command. Note that the

FDM management on data interfaces is not affected by this setting. If you use DHCP, the system uses

the gateway provided by DHCP and uses the data-interfaces as a fallback method if DHCP doesn't

provide a gateway.

• If your networking information has changed, you will need to reconnect—If you are connected with

SSH to the default IP address but you change the IP address at initial setup, you will be disconnected.

Reconnect with the new IP address and password. Console connections are not affected.

• Manage the device locally?—Enter yes to use the FDM. A no answer means you intend to use the FMC

to manage the device.

Example:

You must accept the EULA to continue.

Press <ENTER> to display the EULA:

End User License Agreement

[...]

Please enter 'YES' or press <ENTER> to AGREE to the EULA:

System initialization in progress.

You must change the password for 'admin' to continue.

Enter new password: ********

Confirm new password: ********

You must configure the network to continue.

You must configure at least one of IPv4 or IPv6.

Do you want to configure IPv4? (y/n) [y]:

Do you want to configure IPv6? (y/n) [n]:

Configure IPv4 via DHCP or manually? (dhcp/manual) [manual]:

Enter an IPv4 address for the management interface [192.168.45.45]: 10.10.10.15

Enter an IPv4 netmask for the management interface [255.255.255.0]: 255.255.255.192

Enter the IPv4 default gateway for the management interface [data-interfaces]: 10.10.10.1

Enter a fully qualified hostname for this system [firepower]: ftd-1.cisco.com

Enter a comma-separated list of DNS servers or 'none' [208.67.222.222,208.67.220.220]:

Enter a comma-separated list of search domains or 'none' []:

If your networking information has changed, you will need to reconnect.

For HTTP Proxy configuration, run 'configure network http-proxy'

Manage the device locally? (yes/no) [yes]: yes

Step 4

Log into the FDM on the new Management IP address.

Getting Started

Please stand by.

Getting Started