Cisco Firepower 2130 Instalacja i konserwacja - Strona 17
Przeglądaj online lub pobierz pdf Instalacja i konserwacja dla Serwer Cisco Firepower 2130. Cisco Firepower 2130 26 stron. Rack-mount and ground the chassis
Również dla Cisco Firepower 2130: Podręcznik (12 strony), Podręcznik wdrażania (8 strony), Pierwsze kroki (42 strony)
Drukuj stronę
Installation, Maintenance, and Upgrade
Figure 8: Connect the Tie Wrap
Tie wrap
1
Step 3
Secure the clamp:
a) Plug in the power supply power cord and wrap the clamp around the over mold portion of the power cord.
b) Squeeze the clamp tabs together so that the annular teeth engage with the mate on the clamp.
c) Make sure the clamp fits snugly into the over mold.
d) Adjust the clamp position on the tie wrap so that the clamp is tight against the front of the over mold and the power
cord cannot be removed by lightly pulling on it.
Figure 9: Clamp on Over Mold of Power Cord
1
Power cord
3
Tie clamp annular teeth
Secure the Power Cord on the Power Supply Module
Hexagonal hole
2
2
Power cord over mold
4
Direction to squeeze the clamp tabs
Installation, Maintenance, and Upgrade
17