Cisco IMS/IP-WiFi Instrukcja instalacji i obsługi - Strona 7
Przeglądaj online lub pobierz pdf Instrukcja instalacji i obsługi dla Serwer Cisco IMS/IP-WiFi. Cisco IMS/IP-WiFi 34 stron. Cisco integrated message server installation and operation manual
Drukuj stronę
Installation and Operation Manual
Integrated Message Server, IMS/IP-WiFi
2.3
Function Indicator and Error Relay Output
Function indicator
Figure 3. The function indicator that indicates the status of the IMS/IP
The function indicator and the error relay indicate the status of the IMS/IP. The indication is
dependent of whether the IMS/IP is connected to the A-bus or not, and also whether
there is a Central Unit connected to the A-bus. Which mode the IMS/IP uses is set on the
IMS/IP administration pages, see chapter
information. The function indicator and error relay indications are described below.
IMS/IP connected to A-bus with a Central Unit
Status
Communication with the Central
Unit.
No communication with the
Central Unit.
Shut down
Restart or reboot
IMS/IP connected to A-bus without a Central Unit, or A-bus not connected
Status
A-bus connection or no A-bus
connection.
(Connected or not, it does not
change the indication.)
Shut down
Restart or reboot
For information about other LED indications, see Installation Guide, ELISE2, TD 92232GB.
2007-06-26/ Ver. D
3.2.1 System 900 Interface
Function Indicator
Green
Flashing orange
(100ms ON/100 ms OFF)
Flashing red
(1000ms ON/3000 ms OFF)
Flashing orange
(100ms ON/800 ms OFF)
Function Indicator
Green
Flashing red
(1000ms ON/3000 ms OFF)
Flashing orange
(100ms ON/800 ms OFF)
TD 92322GB
on page 8 for more
Error Relay
Operates
Released
Released
Released
Error Relay
Operates
Released
Released
4