B2 Audio M1 Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Wzmacniacz B2 Audio M1. B2 Audio M1 10 stron.

3.2 POWER / SPEAKER CONNECTIONS

+12V, GND, REM CONNECTION DIAGRAM

Headunit

Ground

We recommend to use 12 gauge speaker cables for increased performance.

Run 12 AWG speaker connecting cables from your speakers to the ampli er's mounting location.

Keep speaker cables away from power cables and the ampli er's RCA input cables.

Use grommets anywhere the cables have to penetrate the vehicle's chassis.

Connect the speakers according to terminals on each speaker.

Strip 3/8" of insulation from the end of each cable and twist the cables strands together tightly.

Make sure there are no stray strands that might touch other cables or terminals which may cause a short.

Crimp spade plugs over the cable ends or tin the ends with solder to provide a secure hold.

Connect the cable ends to the ampli er as shown on the speaker system diagram.

SPEAKER CONNECTION DIAGRAM

CAUTION

The minimum impedance is 1 ohm as a single unit.

In linked mode the minimum impedance is 2 ohm.

Remote turn on

FUSE

750A

12V

Main Battery

8 ohm

~ 1ohms