Cisco S695F Podręcznik dla początkujących - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Serwer Cisco S695F. Cisco S695F 18 stron. Web security appliance
Również dla Cisco S695F: Podręcznik (24 strony), Instrukcja instalacji sprzętu (50 strony)

Drukuj stronę

Cisco S695F Podręcznik dla początkujących

Temporarily Change Your IP Address for Remote Access

To remotely configure the appliance using the network connection, you must temporarily change the

IP address of your computer.

Make a note of your current IP configuration settings as you will need to revert to these settings after

Note

you finish the configuration.

Alternatively, you can use the serial console to configure the appliance, without changing the IP address.

If you use the serial console, see

Temporarily Change Your IP Address on Windows

Note

The exact steps depend on the version of your operating system.

Procedure

Connect your laptop to the primary Management Port (labeled M1) using the cross over or Ethernet cable

Step 1

included in the system box. The Cisco Web Security Appliance uses the M1 Management port only. See

"Plan the Installation" section on page

Go to the Start menu and choose Control Panel.

Step 2

Double-click Network and Sharing Center.

Step 3

Cisco Web Security Appliance S195, S395, S695, and S695F Getting Started Guide

Connect to the Appliance, page