Cisco SNS-3495 series Instrukcja instalacji - Strona 30
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco SNS-3495 series. Cisco SNS-3495 series 36 stron. Sns-3400 series
Również dla Cisco SNS-3495 series: Instrukcja instalacji (19 strony), Instrukcja rozwiązywania problemów (8 strony)
Drukuj stronę
Cable Management
You can connect the keyboard and video monitor to the Cisco SNS-3415 or Cisco SNS-3495 appliance using
the KVM connector available in the front panel of the Cisco SNS-3415 or Cisco SNS-3495 appliance. A KVM
cable is shipped along with the appliance that provides two USB, one VGA, and one serial connector.
The Cisco SNS-3415 or Cisco SNS-3495 appliance does not provide support for a mouse.
The Cisco SNS-3415 or Cisco SNS-3495 provides USB ports on the rear of the appliance that can be used to
connect a keyboard and video monitor.
To connect a keyboard and video monitor to the appliance:
Step 1
Verify that the appliance is turned off.
Step 2
Connect the end of the keyboard cable to the PS/2 (keyboard) port which is located on the back panel of the appliance.
Step 3
Connect the end of the video monitor cable to the PS/2 (video monitor) port which is located on the back panel of the
appliance.
Step 4
Power on the appliance.
Cable Management
Cable management is the most visual aspect of your appliance setup. However, cable management is often
overlooked because it can be time consuming.
Equipment racks and enclosures house more equipment today than ever before. This growth has increased
the need for organized cable management both inside and outside the rack. Poor cable management not only
leads to damaged cables or increased time for adding or changing cables, but also blocks critical airflow or
access. These problems can lead to inefficiencies in the performance of your equipment or even downtime.
There are many solutions to address cable management. They can range from simple cable management rings,
to vertical or horizontal organizers, to troughs and ladders.
All Cisco SNS-3415 or Cisco SNS-3495 appliance cables should be properly dressed so as not to interfere
with each other or other pieces of equipment. Use local practices to ensure that the cables attached to your
appliance are properly dressed.
Proceed to the next section,
continue the installation process.
Connect and Power On the Cisco SNS 3415 or 3495 Appliance
•
•
•
Cisco SNS-3400 Series Appliance Hardware Installation Guide
26
Connect and Power On the Cisco SNS 3415 or 3495 Appliance, on page
Connect and Power On the Server (Standalone Mode), on page 27
NIC Modes and NIC Redundancy Settings, on page 28
System BIOS and CIMC Firmware, on page 29
Install the Cisco SNS 3415 and Cisco SNS 3495 Hardware Appliances
26, to