Cisco UCS B260 M4 Uwaga dotycząca instalacji i obsługi - Strona 42
Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji i obsługi dla Serwer Cisco UCS B260 M4. Cisco UCS B260 M4 50 stron. Blade server
Również dla Cisco UCS B260 M4: Uwaga dotycząca instalacji i obsługi (46 strony)
Drukuj stronę
Installing and Enabling a Trusted Platform Module
Figure 20: Installing an Adapter Card
Procedure
Step 1
Position the adapter board connector above the motherboard connector and align the two adapter captive
screws to the standoff posts (see callout 1) on the motherboard.
Step 2
Firmly press the adapter connector into the motherboard connector (see callout 2).
Step 3
Tighten the two captive screws (see callout 3).
Tip
Installing and Enabling a Trusted Platform Module
The Trusted Platform Module (TPM) is a component that can securely store artifacts used to authenticate the
server. These artifacts can include passwords, certificates, or encryption keys. A TPM can also be used to
store platform measurements that help ensure that the platform remains trustworthy. Authentication (ensuring
that the platform can prove that it is what it claims to be) and attestation (a process helping to prove that a
platform is trustworthy and has not been breached) are necessary steps to ensure safer computing in all
environments. It is a requirement for the Intel Trusted Execution Technology (TXT) security feature, which
must be enabled in the BIOS settings for a server equipped with a TPM.
Note
TPM installation is supported after-factory. However, a TPM installs with a one-way screw and cannot be
replaced or moved to another server. If a server with a TPM is returned, the replacement server must be ordered
with a new TPM.
Procedure
Step 1
Install the TPM hardware.
a) Power off, decommission, and remove the blade server from the chassis.
b) Remove the blade server cover.
c) Install the TPM to the TPM socket on the server motherboard and secure it using the one-way screw that
is provided. See the figure below for the location of the TPM socket.
Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs
34
Removing an adapter card is the reverse of installing it. You might find it helpful when removing
the connector from the motherboard to gently rock the board along the length of the connector until
it loosens.
Servicing the Blade Server