Cisco UCS B420 M3 Instrukcja aktualizacji
Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla Serwer Cisco UCS B420 M3. Cisco UCS B420 M3 8 stron. High performance blade server
Również dla Cisco UCS B420 M3: Uwaga dotycząca instalacji i obsługi (38 strony)
Drukuj stronę
Cisco UCS B420 M3 Server Upgrade Guide for
Intel E5-4600 v2 Series CPUs
You must follow the procedures in this guide when upgrading a Cisco UCS B420 M3 server to use Intel
Caution
E5-4600 v2 Series CPUs. Failure to follow these procedures might result in a non-bootable server.
This document describes the process for successfully upgrading a Cisco UCS B420 M3 server to use
Intel E5-4600 v2 Series CPUs. Downgrade scenarios are also covered.
The procedures in this guide support the following servers:
•
Cisco UCS Blade Server
This section contains the following topics:
•
•
•
•
Minimum Software and Firmware Requirements
Cisco UCS B420 M3 Requirements
The minimum software and firmware versions required for the Cisco UCS B420 M3 server to support
Intel E5-4600 v2 Series CPUs are as follows:
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco UCS B420 M3 blade server
Minimum Software and Firmware Requirements, page 1
Upgrading the Server to Intel E5-4600 v2 Series CPUs, page 2
Downgrading the Cisco Server From Intel E5-4600 v2 Series CPUs, page 7
Sample Board Controller Activation Command Sequence, page 8