Cisco UCS B460 M4 Uwaga dotycząca instalacji i obsługi - Strona 44

Przeglądaj online lub pobierz pdf Uwaga dotycząca instalacji i obsługi dla Serwer Cisco UCS B460 M4. Cisco UCS B460 M4 50 stron. Blade server
Również dla Cisco UCS B460 M4: Arkusz danych (7 strony), Uwaga dotycząca instalacji i obsługi (46 strony), Skrócona instrukcja obsługi (2 strony), Skrócona instrukcja obsługi (5 strony)

Installing and Enabling a Trusted Platform Module

b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device

Configuration window.

c) Set the TPM State option to Enabled.

d) Press F10 to save and exit. Allow the server to reboot, but watch for the prompt to press F2 in the next

step.

Step 4

Verify that TPM Support and TPM State are enabled.

a) Press F2 during reboot to enter the BIOS setup screens.

b) On the Advanced tab, select Trusted Computing and press Enter to open the TPM Security Device

Configuration window.

c) Verify that TPM Support and TPM State are set to Enabled.

d) Continue with enabling the Intel TXT feature in the next step.

Step 5

Enable the Intel TXT feature in the BIOS.

a) Choose the Advanced tab.

b) Choose Intel TXT (LT-SX) Configuration to open the Intel TXT (LT-SX) Hardware Support window.

c) Set TXT Support to Enabled.

d) Verify that the following items are listed as Enabled:

• VT Support (default is Enabled)

• VT-d Support (default is Enabled)

• TPM Support

• TPM State

If VT Support and VT-d Support are not enabled, return to the Advanced tab, select Processor

Configuration, and then set Intel (R) VT and Intel (R) VT-d to Enabled.

e) Press F10 to save and exit.

Cisco UCS B260 M4 and B460 M4 Blade Server Installation and Service Note for Servers with E7 v3 and E7 v2 CPUs

Servicing the Blade Server