Cisco UCS C220 M4 Nota serwisowa - Strona 3

Przeglądaj online lub pobierz pdf Nota serwisowa dla Serwer Cisco UCS C220 M4. Cisco UCS C220 M4 10 stron. For intel xeon v3 series cpus
Również dla Cisco UCS C220 M4: Skrócona instrukcja obsługi (29 strony), Skrócona instrukcja obsługi (29 strony), Instrukcja aktualizacji (11 strony)

Figure 1-1

Installing a DC Power Supply

A readily accessible two-poled disconnect device must be incorporated in the fixed wiring.

Warning

Statement 1022

This product requires short-circuit (overcurrent) protection, to be provided as part of the building

Warning

installation. Install only in accordance with national and local wiring regulations. Statement 1045

When installing or replacing the unit, the ground connection must always be made first and

Warning

disconnected last. Statement 1046

Warning

Installation of the equipment must comply with local and national electrical codes. Statement 1074

Warning

Hazardous voltage or energy may be present on DC power terminals. Always replace cover when

terminals are not in service. Be sure uninsulated conductors are not accessible when cover is in

place. Statement 1075

D R A F T: C i s c o C o n f i d e n t i a l

Cisco UCS C220 M4 NEBS Server Rear Panel (AC Power Supply Version)

#10-32 screw hole for grounding lug

Features Specific to the Cisco UCS C220 M4 NEBS Server

Cisco UCS C220 M4 NEBS Server Service Note