Epson Expression 10000XL Series Instrukcja konfiguracji - Strona 5

❏ Except as specifically explained in this Setup Guide and the

Online Reference Guide, do not attempt to service the scanner

yourself.

❏ Unplug the scanner and refer servicing to qualified service

personnel under the following conditions:

❏ If the power cord or plug is damaged.

❏ If liquid has entered the scanner.

❏ If the scanner has been dropped or the case damaged.

❏ If the scanner does not operate normally or exhibits a

distinct change in performance. (Do not adjust controls

that are not covered by the operating instructions.)

❏ If you plan to use the scanner in Germany, observe the

following:

To provide adequate short-circuit protection and

over-current protection for this scanner, the building

installation must be protected by a 10 or 16 Amp circuit

breaker.

Note for German-speaking users:

Bei Anschluss des Scanners an die Stromversorgung muss

sichergestellt werden, dass die Gebäudeinstallation mit einer

10A- oder 16 A-Sicherung abgesichert ist.

Safety Instructions