Cisco UCS C240 M3 Instrukcja aktualizacji - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja aktualizacji dla Serwer Cisco UCS C240 M3. Cisco UCS C240 M3 10 stron. Nebs server
Również dla Cisco UCS C240 M3: Podręcznik konfiguracji (33 strony), Nota serwisowa (11 strony)
Drukuj stronę
Downgrade Scenario 2: Standalone Server
This scenario assumes the following conditions:
•
•
•
•
Use the following procedure to downgrade to earlier supported CPUs.
Power off the server.
Step 1
Replace the Intel E5-2600/E5-2400 v2 Series CPUs with the earlier supported CPUs.
Step 2
Use the CPU replacement procedures in the Installation and Service guide for your server:
C-Series Installation and Upgrade
Power on the server.
Step 3
Note
Optional: Downgrade your server CIMC.
Step 4
Use the CIMC firmware management procedures in the GUI or CLI
Configuration Guide
Step 5
Optional: Downgrade your server BIOS.
Use the CIMC firmware management procedures in the GUI or CLI
Configuration Guide
.
OL-28629-01
The C-Series server is in standalone mode.
The Cisco UCS Manager software is at the minimum version or later
Firmware Requirements, page
The C-Series server is using the BIOS/CIMC minimum version or later
Firmware Requirements, page
The C-Series server is using the Intel E5-2600/E5-2400 v2 Series CPUs.
The CIMC bundle, including the server CIMC and BIOS, is backward-compatible with earlier
supported CPUs, so the following firmware downgrade steps are optional.
for your release.
for your release.
Cisco UCS C-Series Servers Upgrade Guide for Intel E5-2600 v2/E5-2400 v2 Series CPUs
Downgrading Cisco UCS C-Series Servers From Intel E5-2600/E5-2400 v2 Series CPUs
2).
2).
Guides.
(seeMinimum Software and
(seeMinimum Software and
Cisco UCS
Integrated Management Controller
Integrated Management Controller
9