Digitus DN-82010-1 Podręcznik użytkownika - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Konwerter mediów Digitus DN-82010-1. Digitus DN-82010-1 6 stron. 10/100base-tx fast ethernet media converter
Również dla Digitus DN-82010-1: Podręcznik (2 strony)
Drukuj stronę
- The TP-Fiber Converter
- AC-DC Power Adapter (for external models) or Power Cord
(for internal models)
- The User's Manual
Please notify your local sales distributor immediately if any of
the mentioned items is missing or damaged.
3. Technical Specifications
Standards
Media Supported
TP Connector
Referenced
Transmission
Distance
Data Forward Rate
Flow Control
Power Supply
Power
consumption
Operation Temperature
Relative Humidity
Feature
1. Built in 2-port switch:
-
Supports modified cut-through frame forwarding for low latency
Supports pure converter mode data forwarding for extreme low latency
-
-
Supports flow control for full and halt duplex operation
Bandwidth control
-
-
Forward 1600 bytes packet for management
2. Supports 100Base-FX standard
3. Built in 128KB RAM for data buffer
4. Supports Auto MDI-MDIX function
5. Supports link fault pass through function (LFP)
6. LED display for link/activity, full/half, 10/100M
IEEE802.3, IEEE802.3U, 10/100Base-TX,
100Base-FX
10Base-T: Cat. 3, 4, 5 UTP/STP, max 100m
100Base-TX: Cat5 UTP/STP, max 100m
Multimode fiber model: (50/125µm, 62.5/125µm)
Singlemode fiber model: (9/125µm)
SC/ST/FC
Dual-fiber multimode: 2km
Dual-fiber singlemode: 20/40/60/80/l 00/120km
Single-fiber singlemode: WDM 20/40/60/80km
10Mbps / 100Mbps
IEEE802.3x flow control for full-duplex model
Back-pressure flow control for half-duplex mode
5VDC or 110~260VAC or 48VDC
2.5W
0℃ to 55℃
5% to 80% (non-condensation)