Findeva FKL 200 Instalacja i skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Instalacja i skrócona instrukcja obsługi dla Narzędzia Findeva FKL 200. Findeva FKL 200 5 stron.
Również dla Findeva FKL 200: Instalacja i skrócona instrukcja obsługi (20 strony)
Drukuj stronęfindeva AG
---------------------------------------------------
Operating conditions
Intermittent knockers can be used in dusty environments. The piston seals are suitable for oil-free operation.
Standard installation for Series FKL
1. The control system is the responsibility of the customer
In this case, intermittent control or (ON / OFF) is implemented by the customer by means of a 3/2-way normally
open air valve.
The control function may be performed by
- process control system
- time-lag relay
- switch (on/off)
Maximum distance between valve and FKL 8 m, diameter. 6 mm
2. Pneumatic intermittent control with a PTR (FKL 100 only)
The control function can be implemented by an enable signal
from the
-process control system
-time-lag relay
A
-or another signal
This system has a high impact frequency.
It is also possible to control several units.
FKL Operating Manual
09.08.2002