Cisco UCS E Series Instrukcja instalacji - Strona 23
Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Serwer Cisco UCS E Series. Cisco UCS E Series 46 stron. Ucs e series unified computing system
Również dla Cisco UCS E Series: Przegląd produktów (8 strony), Instrukcja rozwiązywania problemów (28 strony)
Drukuj stronę
The following figure shows a slot driver without retention screw.
Figure 8
See the following topics for more information:
•
•
Installing Slot Dividers
Use this procedure to install a slot divider in a single-wide E-Series Server.
Slot dividers are used only in single-wide E-Series Servers. For double-wide E-Series Servers, you must
Note
remove the slot divider. See
Procedure
Remove any installed modules, blank faceplates, and slot adapters from the router slot that you want to
Step 1
use.
Insert the top rails of the slot divider between the two guide rails in the top of the module slot as shown
Step 2
in the following figure.
OL-26447-03
Slot Divider for SM Slots
Installing Slot Dividers, page 23
Removing Slot Dividers, page 25
"Removing Slot Dividers" section on page
Hardware Installation Guide for Cisco UCS E-Series Servers
Installing the E-Series Servers
25.
23