Cisco 2600 Series Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Gateway Cisco 2600 Series. Cisco 2600 Series 22 stron. Configuring adsl wic to support pppoe clients
Również dla Cisco 2600 Series: Instrukcja instalacji (12 strony), Informacje o wersji (32 strony), Konfiguracja (15 strony), Nota aplikacyjna (41 strony), Arkusz danych (6 strony), Dodatek (15 strony), Przegląd (13 strony), Skrócona instrukcja obsługi (2 strony), Podręcznik (5 strony)

Connecting the DC Power Supply

Figure 3-19 DC-Input Power Supply Terminal Block

On/off

switch

Strip 3/16 in. of shielding from the free end of each power lead wire that is attached to the DC-input

Step 3

power supply.

Step 4

Insert the three power leads into the slotted wire receptacles on the terminal block. (See

The illustration shows the DC power supply terminal block. The proper wiring sequence is ground

Warning

to ground, positive to positive (line to L), and negative to negative (neutral to N). Note that the

ground wire should always be connected first and disconnected last. To see translations of the

warnings that appear in this publication, refer to the Regulatory Compliance and Safety

Information document that accompanied this device.

Cisco 2600 Series Routers Hardware Installation Guide

3-14

Positive

Ground

Negative

Chapter 3

Installing the Router

Figure

3-20.)

OL-2171-02