Cisco 2800 Series Skrócona instrukcja obsługi - Strona 23

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gateway Cisco 2800 Series. Cisco 2800 Series 45 stron. Cisco ios software configuration
Również dla Cisco 2800 Series: Skrócona instrukcja obsługi (13 strony), Arkusz danych (8 strony), Skrócona instrukcja obsługi (47 strony), Nota aplikacyjna (41 strony), Konfiguracja (10 strony), Przegląd (27 strony), Arkusz danych (5 strony), Arkusz danych (20 strony), Konfigurowanie (32 strony)

Step 6

Install the plastic covers over the terminals. (See Figure 19 or Figure 20.)

Warning

The safety cover is an integral part of the product. Do not operate the unit without the safety cover installed.

Operating the unit without the cover in place will invalidate the safety approvals and pose a risk of fire and

electrical hazards. Statement 117

Step 7

Organize and secure the wires using cable ties as shown in Figure 19 or Figure 20. Make sure that the wires do not

project above or below the front panel of the router.

Step 8

Turn on power to the DC circuit. Be sure to remove tape used to secure the circuit-breaker switch in the OFF position.

Figure 19

DC Wire Routing and Attachment for Cisco 2811 Routers

Plastic covers

Figure 20

DC Wire Routing and Attachment for Cisco 2821 and Cisco 2851 Routers

Plastic covers

2 4 - 6 0 V -

- - 8 A

C O N S O

L E

A U X

2 4 - 6 0 V

- - - 1 2 A

Cable tie

From DC

power

source

Cable tie

From DC

power

source