Epson II Pierwsze kroki - Strona 8

Przeglądaj online lub pobierz pdf Pierwsze kroki dla Skaner Epson II. Epson II 27 stron. Epson color scanner getting started

Carefully remove the interface card from its packaging,

holding it only by its top edges. Then place it on a flat,

clean surface.

Caution:

Avoid touching the components or the gold contacts on

the interface

electricity.

Locate jumpers Jl and J2 on the interface card, as shown

below.

The settings are printed on the circuit board next to the

jumpers. To change a setting, lift off the jumper cap and

reinstall it over the appropriate pair of pins.

Caution:

Be careful not to bend the jumper pins.

they can be damaged by static

card;