Cisco C1100TG-1N32A Instrukcja instalacji sprzętu - Strona 33

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Gateway Cisco C1100TG-1N32A. Cisco C1100TG-1N32A 44 stron. Terminal gateway

Install and Connect the Router

Connecting to DC Power

Warning

To reduce risk of electric shock or fire, installation of the equipment must comply with local and national

electrical codes. Statement 1074

Warning

To reduce risk of electric shock, when installing or replacing the unit, the ground connection must always be

made first and disconnected last. Statement 1046

Warning

To reduce risk of electric shock, before performing any of the following procedures, ensure that power is

removed from the system. Statement 1003

Caution

The two negative and two positive inputs are not intended for redundant connection to two independent sources

of supply. The two negative and two positive input terminals are intended to increase current-carrying capacity

by paralleling conductors.

If the two negative and two positive inputs are used, the negative inputs must be connected to the same source

and the positive inputs must be connected to the same source.

Hardware Installation Guide for the Cisco 1100 Terminal Gateway

Connecting to DC Power