Cisco Comcast Xfinity TC8706C Skrócona instrukcja obsługi - Strona 7
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gateway Cisco Comcast Xfinity TC8706C. Cisco Comcast Xfinity TC8706C 8 stron. Wireless gateway 2
Drukuj stronę
• 5 GHz Wi-Fi signals may not travel as far as 2.4 GHz. In areas of your home that
are furthest away from the Wireless Gateway 2, only the 2.4 GHz network may
be available. We recommend connecting to both 2.4 and 5 GHz networks during
initial set-up of all your Wi-Fi devices
If you're connected to the Wireless Gateway 2's 5 GHz network and move out
of the 5 GHz range (move to a different room), your Wi-Fi device
disconnect and automatically reconnect to your 2.4 GHz (if you've connected to it
previously).
Note: When you're back in the 5 GHz range, go to Wi-Fi settings (p. 3-4) to reconnect to the Wireless
Gateway 2's 5 GHz network in order to experience its benefits.
• The Wi-Fi bars
• Some Wi-Fi devices
WPS lets you set up secure Wi-Fi networks without manually
entering your Wi-Fi network information. Pressing the WPS button
on the Wireless Gateway 2 initiates WPS for both 2.4 and 5 GHz Wi-Fi bands. You
can then connect to either band using WPS.
Learn about the Wireless Gateway 2 at http://customer.comcast.com/userguides.
For questions about your XFINITY services, call 1-800-XFINITY.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Mac OS
OS X
are registered trademarks of Apple Inc. IOS is a trademark or registered trademark of Cisco in the U.S. and
®
other countries and is used under license. Android is a trademark of Google Inc. All trademarks are the property of
their respective owners. © 2013 Comcast. All rights reserved.
on your Wi-Fi device
support Wi-Fi Protected Setup (WPS).
.
indicate signal strength.
may
and
®
7