Cisco Expressway CE1200 Instrukcja instalacji urządzenia - Strona 39
Przeglądaj online lub pobierz pdf Instrukcja instalacji urządzenia dla Gateway Cisco Expressway CE1200. Cisco Expressway CE1200 42 stron.
Również dla Cisco Expressway CE1200: Instrukcja instalacji (23 strony)
Drukuj stronę
Troubleshooting
Step 3
Check the Hypervisor checkbox, then press Disable.
Lag During Boot up Due to Power Characterization Check
The power characterization test is run only once when you plug in and power up the CE1200. If the power
characterization test continues to run, causing a lag in the boot time, ensure that it is disabled in the CIMC.
To do this:
Step 1
Log in to the CIMC (see
Step 2
Click the menu arrow in the top-left corner.
Step 3
Go to Chassis > Power management > Power Cap Configuration.
Step 4
Click Disable Power Characterization.
Step 5
Click Save Changes.
Connecting Using CIMC Serial Over
Lag During Boot up Due to Power Characterization Check
LAN).
Cisco Expressway CE1200 Appliance Installation Guide (14.0)
33