Cisco Expressway Series Podręcznik konfiguracji - Strona 6
Przeglądaj online lub pobierz pdf Podręcznik konfiguracji dla Gateway Cisco Expressway Series. Cisco Expressway Series 47 stron. Ip port usage
Drukuj stronę
Cisco Expressway IP Port Usage Configuration Guide
Table 2 Default Port Ranges on Expressway (continued)
Protocol
Purpose
UDP
RTP/RTCP media 36000-
UDP
Multiplexed
media on
Small/Medium
Expressway-E
systems
UDP
Multiplexed
media on Large
Expressway-E
systems
TCP
SIP traversal
UDP
H.323 traversal
Current
Details
Range
The range is configurable.
59999
On S/M Expressway, the first two ports can be used for multiplexed
media if you do not use default/custom ports.
On L Expressway, the first twelve ports of the range are used for
multiplexed media. You cannot customize that subrange.
2776/2777 is older pair but kept as default by the ability to
2776/2777
customize when the new default range was introduced with
OR
36000/36001
S/M system options. Custom pair is defined on Configuration
> Traversal > Ports.
On Expressway-E only.
Note: In the connection maps and port references we do not show
all the port options for the sake of clarity. For example, if the
diagram shows 2776/2776, but you have chosen to use
36000/36001 instead, then you don't need to also open 2776/2777.
New range introduced with Large system option. This range is
36000-
always the first twelve ports of the RTP/RTCP media range, so it
36011
will be different if you configure a different media range.
On Expressway-E Large OVAs or large scale appliances only.
Note: In the connection maps and port references we do not show
all the port options for the sake of clarity. For example, if the
diagram shows 2776/2776, but you have a large Expressway, then
you should open the first twelve ports of the media range instead of
2776/2777.
7001
Configurable. SIP listening port on the first Expressway-E traversal
server zone. Subsequent traversal server zones will use incremental
port numbers, eg. 7002, by default.
6001
Configurable. H.323 listening port on the first Expressway-E
traversal server zone. Subsequent traversal server zones will use
incremental port numbers, eg. 6002, by default.
6