Digitus professional DN-16100-2 Skrócona instrukcja obsługi - Strona 3
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Serwer Digitus professional DN-16100-2. Digitus professional DN-16100-2 12 stron. H.264 multi-profile video server
Drukuj stronę50 mm SlimLine Half Coupler 100 kg
Warning
Unpacking Instructions
Immediately upon receiving this product, carefully unpack the carton and check the contents to ensure
that all parts are present, and have been received in good condition. Notify the dealer immediately and
retain packing material for inspection if any parts appear damaged from shipping or the carton itself
shows signs of mishandling. Save the carton and all packing materials. In the event that a fixture must be
returned to the factory, it is important that the fixture be returned in the original factory box and packing.
Your shipment includes:
Showtec 50 mm SlimLine Half Coupler 100 kg
User manual
Safety Instructions
Every person involved with the installation, operation and maintenance of this device has to:
be qualified
follow the instructions of this manual
Before use, please make sure that there is no damage caused by transportation.
Should there be any, consult your dealer and do not use the device.
To maintain perfect condition and to ensure a safe operation, it is absolutely necessary for the user to
follow the safety instructions and warning notes written in this manual.
Please consider that damages caused by manual modifications to the device are not subject to
warranty.
This device contains no user-serviceable parts. Refer servicing to qualified technicians only.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance of
this manual or any unauthorized modification to the device.
Never remove warning or informative labels from the unit.
Never use or continue to work with a damaged or defective coupler.
Never use the coupler for loads that exceed the maximums provided in this manual (SWL: 100 kg).
Carefully inspect the coupler before use.
Do not shake the device. Avoid brute force when installing or operating the device.
Always pay attention to local regulations, with respect to occupational health, safety and general
rules for safe working.
Always check the national standards and regulations of the country where the coupler is used.
All couplers should be visually inspected before use. In the event of any damage, the coupler should
be taken out of service and returned to an approved Showtec dealer for inspection.
Avoid contact with water or other liquids.
Ordercode: 75001S/75001B
2