Cisco IG31R-EU-E-K9 Instrukcja instalacji - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Gateway Cisco IG31R-EU-E-K9. Cisco IG31R-EU-E-K9 18 stron.

IG21, IG21R and IG31R Hardware Installation Guide

Mounting the Router on a Wall Using Two KeyHoles

CAUTION: If you are mounting the router on drywall, use two hollow wall anchors to secure the unit to the wall using the two screws

included in the kit.

The distance between the two hollow wall anchors should be 120 mm to match the distance between the two keyholes on the back of

the router.

(Figure

Reserve a minimum of 4.5 mm distance between the screw heads and the wall

screw head thickness is 1.5 mm, the screw thread diameter is 4.0 mm and the screw length is 16.0 mm.

Figure 7

Back of Router Showing Two Keyholes for Mounting at 120 mm

Figure 8

Measurements for Attaching Two Screw for Keyhole Mounting to Wall

To attach the router to the wall, place the two keyholes on the back of the unit over the two screws mounted on the wall. Then, pull the

router downward so that the router hangs from the screws

7).

(Figure

8). The screw head diameter is 9.8 mm, the

(Figure

9).