Cisco Physical Access Gateway Skrócona instrukcja obsługi - Strona 11
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Gateway Cisco Physical Access Gateway. Cisco Physical Access Gateway 17 stron.
Drukuj stronę5
Cisco Physical Access Output Module
What's In the Box
Each Cisco Output Module includes the following:
• 2 mounting brackets, with 4 screws for each bracket
• Regulatory compliance and safety information
• Quick Start Guide
• Connector plugs:
Type
Quantity
3 Pin
9
2 Pin
3
Output Module Overview and Port Descriptions
The Cisco Output Module includes 10 ports for connecting additional output devices, as shown in Figure 5.
Figure 5
Cisco Output Module Ports and Connectors
6
5
4
The following items are shown in Figure 5:
Type
Power
1
2
CAN interface
CAN terminator
3
Description
Two-pin connector for Voltage In (VIN) and Ground (GND) to connect a 12 to 24 VDC
external power source.
A 3-wire CAN interface used to connect the module to the CAN bus.
The CAN terminator switch should be set to ON for the last device in a CAN wiring bus.
This switch should be set to OFF for all other devices in the CAN bus.
1
2
3
11