Cisco S695 Podręcznik dla początkujących - Strona 16
Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Gateway Cisco S695. Cisco S695 18 stron. Web security appliance
Również dla Cisco S695: Podręcznik (24 strony), Instrukcja instalacji sprzętu (50 strony)
Drukuj stronę
Configuration Summary
Configuration Summary
Item
Management
Data
Traffic Monitor
Computer
Address
Cisco Web Security Appliance S195, S395, S695, and S695F Getting Started Guide
16
Description
You can manage the web security appliance from the management port
(Management port) by entering http://192.168.42.42:8080 or using the IP address
assigned to the management interface after you have completed the System Setup
Wizard.
If you reset your configuration to factory default settings (for example, by
re-running the System Setup Wizard), you can access the management interface
only from the Management port (http://192.168.42.42:8080), so ensure you have
a connection to the Management port.
Also, verify that you open firewall ports 80 and 443 on your management
interface.
After running the System Setup Wizard, at least one port on the appliance is
configured to receive web traffic from the clients on the network: M1 only; M1
and P1; M1, P1 and P2; P1 only; or P1 and P2.
If you configured the web proxy in explicit forward mode, the applications
Note
on the client machines must be configured to explicitly forward web traffic
to the web security appliance's web proxy using the IP address configured
for data, either M1 or P1.
After running the System Setup Wizard, one or both L4 traffic monitor ports (T1
only or both T1 and T2) are configured to listen to traffic on all TCP ports. The
default setting for the L4 traffic monitor is monitor only. During or after setup,
you can configure the L4 traffic monitor to both monitor and block suspicious
traffic.
Remember to change your computer IP address back to the original settings that
you noted in the
"Temporarily Change Your IP Address for Remote Access"
section on page
6.
You can review a summary of your system settings from the System
Note
Administration > Configuration Summary page.