Cisco SM-X-24FXS/4FXO Instrukcja instalacji sprzętu - Strona 11
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Gateway Cisco SM-X-24FXS/4FXO. Cisco SM-X-24FXS/4FXO 40 stron. Voice gateway
Drukuj stronę
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Introduction to Cisco VG400 Voice Gateway
Platform and Software Requirements
Cisco 400 Voice Gateway is supported on IOS XE Release16.10.1. The ports provide gateway services for
Cisco Unified Communications using Cisco Unified Communications Manager or Cisco Unified
Communications Manager Express. The following list provides information about the software version that
is compatible with the FXO and FXS ports:.
• CUCM: 12.5.1, 12.0.1su2 and 12.0.1 (with device pack)
• IOS XE: Version 16.10.1 and later
Configuration Methods
After Cisco 400 Voice Gateway is operational, use the procedures in Cisco 400 Voice Gateway Software
Configuration Guide to configure the specific services and functions or to make changes to an existing
configuration.
There are multiple methods for configuring Cisco 400 Voice Gateways:
• System configuration dialog
• Configuration mode: Cisco IOS software CLI
• Setup command facility: Remote configuration through a LAN
• SNMP-based application: CiscoView or HP OpenView
• HTTP-based configuration server: Provides access to the CLI from a web browser
Cisco VG400 Voice Gateway Hardware Installation Guide
Platform and Software Requirements
9