Cisco SM-X-24FXS/4FXO Instrukcja instalacji sprzętu - Strona 29
Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Gateway Cisco SM-X-24FXS/4FXO. Cisco SM-X-24FXS/4FXO 40 stron. Voice gateway
Drukuj stronę
- 1. Table of Contents
- 2. Location and Mounting Requirements
- 3. Temperature Control and Ventilation
- 4. Rack Requirements
- 5. Access to Chassis
- 6. Power Source and Supply
- 7. Network Cabling Considerations
- 8. Interference Considerations
- 9. Required Tools and Equipment for Installation
- 10. Site Log
- 11. Installation Checklist
Installing the Cisco VG400 Voice Gateway
flashfs[4]: Initialization complete.
Router>
Step 6
Enter privileged EXEC mode:
Example:
Router> enable
Router#
Step 7
Continue with the
Note
If the rommon 1> prompt appears, your system has booted in ROM monitor mode. For information on the
ROM monitor, refer to the router rebooting and ROM monitor information in the Cisco IOS Configuration
Fundamentals Configuration Guide for your Cisco IOS software release.
Troubleshooting, on page 29
section.
Cisco VG400 Voice Gateway Hardware Installation Guide
Power-On Procedure
27