Cisco VG410 Instrukcja instalacji sprzętu - Strona 31

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Gateway Cisco VG410. Cisco VG410 38 stron. Voice gateway

Installing the Cisco VG410 Voice Gateway

Figure 11: Application of the Foot

Chassis Grounding

Before you connect the power or turn on the power to your chassis, you must provide an adequate chassis

ground (earth) connection for the chassis. To install the ground connection for your router, perform the

following steps:

Before you begin

After you install the voice gateway, you must connect the chassis to a reliable earth ground. You must install

the ground wire in accordance with local electrical safety standards.

You will need the following tools and supplies to connect the system ground to the chassis:

• A size 10 AWG (4 mm2) or larger copper wire

• An appropriate user-supplied ring terminal with an inner diameter of 1/4 in. (5–7 mm).

• A Philips screwdriver

Step 1

Use the wire stripper to strip one end of the ground wire to the required length for the ground lug or terminal.

• For the ground lug, you'd require approximately 0.75 inch (20 mm)

• For user-provided ring terminal, use length as required

Step 2

Insert the wire into the open end of the grounding lug.

Step 3

Use the crimping tool to carefully crimp the wire receptacle around the wire. This step is required to ensure a proper

mechanical connection.

Cisco VG410 Voice Gateway Hardware Intallation Guide

Chassis Grounding