Cisco VG410 Instrukcja instalacji sprzętu - Strona 36

Przeglądaj online lub pobierz pdf Instrukcja instalacji sprzętu dla Gateway Cisco VG410. Cisco VG410 38 stron. Voice gateway

Replacing the AC Power Supply

To replace or install an AC power supply into the device, perform these steps:

Step 1

Use the handle to push the power supply into the router. The power supply latch should provide an audible click when

the supply is fully seated.

Step 2

Install the AC power cord into the power socket on the power supply.

Step 3

If used, reapply the Velcro strap around the power cord and the power supply latch.

Step 4

If the device was turned off, turn the power back on to the device.

Cisco VG410 Voice Gateway Hardware Intallation Guide

Setting up the Power Supplies