Acuity Brands nLight AIR rPODBA 2S DX Podręcznik - Strona 2
Przeglądaj online lub pobierz pdf Podręcznik dla Przełącznik Acuity Brands nLight AIR rPODBA 2S DX. Acuity Brands nLight AIR rPODBA 2S DX 4 stron. Battery-powered wall switch
Drukuj stronę
All rPODBA switches are shipped with wall plates, however, the following order information is available to acquire replacement wall plates.
Wall Plate - Additional or Replacement
Series
WS XPODA Wall Plates (Standard)
SSW
Sealed Covers
Accessories
RPODBA MOUNTRING Replacement mounting ring for rPODBA and rPODB switches
SSW 1GNG WH
Sealed screwless wall plate to prevent liquid intrusion, white
SSW 1GNG IV
Sealed screwless wall plate to prevent liquid intrusion, ivory
SSW 1GNG RD
Sealed screwless wall plate to prevent liquid intrusion, red
WALL SWITCH CLEANING
It will occasionally be necessary to clean the wall switches. All rPODBA switches may be wiped down with a soft cloth or paper
towel dampened with glass cleaner, vinegar and water, hydrogen peroxide, or a mild abrasive. Spray a limited amount on the
cloth or paper towel prior to applying. Do not spray cleaner on the switches directly, and do not wipe the switches down with a
towel saturated (drips when wrung out) with cleaner.
If the ability to clean the switches using chemical spray disinfectants is desired, we recommend the use of the Sealed Screwless
Wall Plate (SSW). The Sealed Screwless Wall Plate is a cover for the standard wall plate, designed with an IP54 rating. It
consists of a transparent silicone rubber layer that covers the wall switch to prevent liquids from entering the wall switch while
maintaining a tactile button feel. The Sealed Screwless Wall Plate is the ideal solution to prevent liquids from entering the wall
switch while maintaining a tactile button feel. The Sealed Screwless Wall Plate is the ideal solution to help protect a wall switch
from fluid entering the device while enabling the use of disinfectants recommended by the EPA for use against SARS-CoV-2, the
coronavirus that causes COVID-19, which often require spraying or saturating the surface.
SPECIFICATIONS
Dimensions 2.74" H x 1.68" W x 1.63" D (6.96 cm x 4.27 cm x 4.14 cm)
Weight 4.25 oz
Mounting Single Gang Switch Box or Low Voltage Ring
Color White, Ivory, Lt. Almond, Gray, Red, Black
Operating Temperature -40°C to 60°C (indoor use only)
Relative Humidity Standard: 20 to 75% non-condensing
Radio Frequency Dual Radio: 900Mhz & 2.4GHz
RF Transmit Power 900Mhz: +20dBm; 2.4GHz: Variable
Wireless Standard 900MHz: IEEE 802.15.4-based
Wireless Range 900MHz: Up to 1,000 ft. (~304m) in free space/ line of sight
Security Application Data Encryption: AES-128 bit
Regulatory Compliance FCC ID: 2ADCB-RMODIT3 RoHS
Battery Type 3 AAA lithium (included)
Battery Life 10 years (with lithium batteries)
Programming Tool CLAIRITY™+ mobile app
Acuity Brands | One Lithonia Way Conyers, GA 30012 Phone: 800.535.2465 www.acuitycontrols.com
© 2019-2022 Acuity Brands Lighting, Inc. All rights reserved. Rev. 09/01/22
# of Gangs
Color
1 GNG
Single Gang
WH White
IV
Ivory
GY
Gray
2
2.4GHz: Version 4.0+ of the Bluetooth specification
Minimum of 150 ft through typical construction
2.4GHz: Up to 60 ft. (~18m) in free space/ line of sight
Mutual Entity Authentication
Message Confidentiality
Message Authentication and Replay Prevention
Limited Anonymity
Complies with California Civil Code Title 1.81.26, Security of Connected Devices, approved under Senate Bill No. 327 (2018)
IC: 6715C-RMODIT3
IFETEL: RCPNLNL20-2057
ORDERING INFORMATION
AL
Light Almond
VP
2
BK
Black
2
RD
Red
Packaging
Variety Pack
[blank]
Single Unit
2
M5
5 Pack
2
M6
6 Pack
1,2
1. Available only for variety pack.
2. Not available for SSW series
3. Single units only available for SSW series
For more information on the
Sealed Screwless Wall Plates
3
RPODBA
2 of 4