Digiway SW50 Instrukcja obsługi - Strona 9
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Otwieracz drzwi garażowych Digiway SW50. Digiway SW50 14 stron. Dual motor controller
Również dla Digiway SW50: Instrukcja obsługi (5 strony)
Drukuj stronę
GATE MOTOR CONTROLLER
3.1 Control inputs
Fig.10. DC2 PCB dimensions and mounting holes
Control Terminals
OPN ----- N/O open input.
PED ------ N/O pedestrian open push button, only open motor-1
CLS-------N/O Close Gate
OSC------ N/O pedestrian open push button, only open motor-1
STP-------N/C Stop motor
PEB ------ N/C photo electrical beams
OL1 ------ Motor 1 open limit switch, N/C or N/O selected by DIP4
CL1 ------ Motor 1 close limit switch, N/C or N/O selected by DIP4
OL2 ------ Motor 2 open limit switch, N/C or N/O selected by DIP4
CL2 ------ Motor 2 close limit switch, N/C or N/O selected by DIP4
Plug in receiver or on board receiver
Buttons
OPN button ---- full (M1&M2) open gate and used for settings
PED button ----- Ped (M1) open gate and used for settings
CLS button ----- CLS gate and used for settings
OSC button ----- Stop motor
3.2 DIP Switch Settings
DIP1---- SET
ON—set,
DIP2---- SYNC
ON—SYNC mode,
DIP3---- LKPS
ON—Lock Pulse Output, OFF – Lock Presence Output
DIP4---- NOLS
ON—N/C limit switch,
DIP5---- PECL
ON—PE trig Auto Close, OFF – No PE trig Auto close
DIP6---- AUCL
ON—Auto Close Mode,
OFF – Run
OFF – No Sync mode
OFF – N/O limit switch
OFF – No Auto close
- 9 -