Epson Stylus Photo RX700 Series Informacje o produkcie - Strona 4

Przeglądaj online lub pobierz pdf Informacje o produkcie dla Skaner Epson Stylus Photo RX700 Series. Epson Stylus Photo RX700 Series 17 stron. Epson scan icm updater v1.20 (psb.2008.07.001)
Również dla Epson Stylus Photo RX700 Series: Podręcznik Start Here (8 strony), Aktualizacja (1 strony), Zacznij tutaj (2 strony)

Epson Stylus Photo RX700 Series Informacje o produkcie
Epson Stylus Photo RX700
Safety Approvals
Safety standards
UL 60950, CSA C22.2 No. 60950
EMC
FCC part 15 subpart B class B
CSA C108.8 class B
Supported Memory Cards
Top slot
SmartMedia
standard 2000 compliant)
xD-Picture Card
Middle slot
Memory Stick (max. 128MB)
Memory Stick Duo *
Memory Stick PRO
Memory Stick PRO Duo
MagicGate Memory Stick
MagicGate Memory Stick Duo*
SD (Secure Digital) Card
MMC (MultiMediaCard)
miniSD Card*
* Adapter required
Bottom slot
CompactFlash
IBM Microdrive
Memory Card Image File Requirements
File format
JPEG or TIF format image files,
DOS FAT taken with a DCF
version 1.0 compliant digital camera
(supports Exif Print v. 2.1 and 2.2)
Media format
DCF (Design rule for Camera File
system) version 1.0 compliant*
Image size
80 × 80 to 4600 × 4600 pixels
Number of files
Up to 999
*
The DCF standard is set by the Japan Electronics and Information Technology
Industries Association (JEITA).
Note:
You can't print images whose file names contain double-byte
characters, as is the case with some Asian language fonts. Do not
use Asian language fonts to name your files if you will be printing
from the memory card.
Epson Stylus Photo RX700
4 -
TM
(maximum 128MB;
TM
®
®
TM
TM
Type I and Type II
TM

Loading Paper

Loading Plain Paper
The front tray is for loading letter-size plain paper only
×
(8.5
11-inch photocopier paper). You can load up to
150 sheets of 17-pound plain bond paper in the front tray.
Caution:
All other types of paper must be loaded in the rear sheet feeder
(see page 5).
1. Open the front cover.
2. Fan a stack of paper (up to 150 sheets), then tap it on a flat
surface to even the edges.
3. Load the paper. Align it with the line on the yellow sticker,
being careful not to push it in too far.
Caution:
Do not push the paper in too far. Make sure the paper is stacked
evenly.
Too far in
5/05
Press
Edges not even