Epson Stylus Scan 2500 Instrukcja konfiguracji - Strona 24

Przeglądaj online lub pobierz pdf Instrukcja konfiguracji dla Skaner Epson Stylus Scan 2500. Epson Stylus Scan 2500 35 stron. Epson imaging products (scanners, digital cameras, and stylus scan devices) compatibility chart for macintosh os x classic
Również dla Epson Stylus Scan 2500: Podręcznik użytkownika (7 strony), Karta informacyjna produktu (4 strony), Specyfikacje (2 strony), Karta informacyjna produktu (4 strony), Biuletyn wsparcia produktu (12 strony), Informacje o produkcie (12 strony), Zacznij tutaj (4 strony), Podręcznik (11 strony), Biuletyn wsparcia produktu (3 strony), Lista części (9 strony), Podręcznik online (10 strony), Zacznij tutaj (4 strony), Informacje uzupełniające (12 strony)

When background printing is on, you can use your Macintosh while it is preparing

a document for printing. You must turn on background printing to use the EPSON

StatusMonitor utility to manage print jobs.

Close the Chooser.

Notice for using USB Ports

If you connect several units of the same type, each unit is assigned a separate USB port

number, such as USB port 1, USB port 2, and so on. Performing any of the following

functions may cause the USB port numbers for the individual units to change.

Restarting your Macintosh

Turning the Stylus Scan off and on

Detaching and reconnecting the USB cable

Please check the assigned USB port number in the Chooser after performing any of

these functions.

Before turning on your USB hub (if necessary) and your Stylus Scan, turn on the

Macintosh and wait until the desktop appears.

When unplugging the USB cord, wait a few seconds before plugging it back in.

Otherwise, the Macintosh may not recognize your Stylus Scan and you may be unable

to print correctly.

Installing Ink Cartridges

Before installing the ink cartridges, note the following.

Warning:

The ink cartridges are self-contained units. Under ordinary use, ink will not

leak from a cartridge. If ink does get on your hands, wash them thoroughly

with soap and water. If ink gets into your eyes, flush them immediately with

water. If discomfort or vision problems remain after a through flushing, see

a doctor immediately.

Note:

Do not open the ink cartridge packages until just before you install them, or the

ink may dry up.

Always use new ink cartriges. Reinstalling partially empty ink cartridges causes

the printer to send inaccurate information to the Status Monitor regarding the

amount of ink remaining.

Use the ink cartridges packed with your printer the first time you install ink

cartridges, otherwise the printer may not charge ink properly.

Follow the steps below to install the ink cartridges.

Make sure the Stylus Scan is turned on.

Installing Ink Cartridges