Epson TM-H6000IIIU Podręcznik rozwoju - Strona 32

Przeglądaj online lub pobierz pdf Podręcznik rozwoju dla Skaner Epson TM-H6000IIIU. Epson TM-H6000IIIU 32 stron.
Również dla Epson TM-H6000IIIU: Podręcznik rozwoju (26 strony), Podręcznik rozwoju (45 strony)

Epson TM-H6000IIIU Podręcznik rozwoju
The power is
Upon completion of EndInsertion
turned
off
method, the following retune values
during insertion
are set:
RC: OPOS_SUCCESS
RCE: 0
The result of data analysis is
notified by ErrorEvent.
RC and RCE of the ErrorEvent are as
follows:
When power OFF state is detectable
RC: OPOS_EX_NOHARDWARE
RCE: 0
When
detectable
RC: OPOS_E_OFFLINE
RCE: 0
The
paper
is
Upon completion of EndInsertion
removed during
method, the following retune values
insertion
are set:
RC: OPOS_SUCCESS
RCE: 0
The result of data analysis is
notified by ErrorEvent.
RC and RCE of the ErrorEvent are as
follows:
RC: OPOS_E_EXTENDED
RCE: OPOS_EMICR_NOCHECK
The
line
is
Upon completion of EndInsertion
turned off during
method, the following retune values
insertion
are set:
RC: OPOS_SUCCESS
RCE: 0
The result of data analysis is
notified by ErrorEvent.
RC and RCE of the ErrorEvent are as
follows:
RC: OPOS_E_OFFLINE
RCE: 0
The timeout time
Upon completion of EndInsertion
is up
method, the following retune values
are set:
RC: OPOS_SUCCESS
RCE: 0
The result of data analysis is
notified by ErrorEvent.
RC and RCE of the ErrorEvent are as
follows:
RC: OPOS_E_ILLEGAL;
RCE: OPOS_EX_TIMEOUT
power
OFF
state
28
APPLICATION DEVELOPMENT GUIDE
MICR (EPSON TM Series)
Version 3.00 Feb. 2019
Upon completion of EndInsertion
method, the following retune values
are set:
When power OFF state is detectable
RC: OPOS_E_ILLEGAL
RCE: OPOS_EX_BUSY
When
power
detectable
RC: OPOS_E_OFFLINE
RCE: 0
There is no notification by event.
is
not
Upon completion of EndInsertion
method, the following retune values
are set:
RC: OPOS_E_EXTENDED
RCE: OPOS_EMICR_NOCHECK
There is no notification by event.
Upon completion of EndInsertion
method, the following retune values
are set:
RC: OPOS_E_OFFLINE
RCE: 0
There is no notification by event.
Upon completion of EndInsertion
method, the following retune values
are set:
RC: OPOS_E_ILLEGAL;
RCE: OPOS_EX_TIMEOUT
There is no notification by event.
OFF
state
is
not