Epson 1280 - Stylus Photo Color Inkjet Printer Podręcznik dla początkujących - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik dla początkujących dla Akcesoria do drukarek Epson 1280 - Stylus Photo Color Inkjet Printer. Epson 1280 - Stylus Photo Color Inkjet Printer 32 stron. Product support bulletin(s)
Również dla Epson 1280 - Stylus Photo Color Inkjet Printer: Wymiana wkładów (2 strony), Biuletyn wsparcia produktu (6 strony), Biuletyn wsparcia produktu (1 strony), Podręcznik uzupełniający (1 strony), Podręcznik użytkownika (27 strony), Podręcznik zgodności (1 strony), Podręcznik uzupełniający (2 strony), Zacznij tutaj (2 strony), Broszura i specyfikacje (2 strony), Informacje o produkcie (13 strony), Podręcznik Start Here (6 strony), Specyfikacje (2 strony), Podręcznik użytkownika (12 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (2 strony), Biuletyn wsparcia produktu (4 strony), Biuletyn wsparcia produktu (7 strony), Instrukcja instalacji (8 strony)

Epson 1280 - Stylus Photo Color Inkjet Printer Podręcznik dla początkujących
Sawgrass Technologies, Inc.
®
SubliJet IQ
Getting Started Guide for the EPSON Stylus Photo 1280
Tips for Using the
QuickConnect System
Check the 3M Dual Lock Tape connections periodically
Ensure the support arm is securely attached and not drooping, and that the lid props are
firmly attached. If the support arm droops too low, the tubing could scrape the bottom of
the printer.
Check the clearance periodically
Ensure there is clearance between the tubing going between the color cartridge and the
black cartridge and the printer's plastic overhang. Make sure the tubing isn't scraping the
overhang, or the tubing will become worn. If there is not a lot of clearance, pull the
overhang upward and hold if for 30 seconds to 'stretch' it.
Check the ink level in your ink bags periodically
As the bags empty, they flatten in appearance. Before beginning a large print job, check
the ink bags to ensure enough ink is available to finish the job.
Ink indicator shows as low, even though ink bags are full
The printer keeps track of how much ink has been used, and tries to write that level to the
chip. Because the chips are write protected, it is not successful at changing the ink level
value on the chips, however, the software based "Epson Status Monitor" reports the level
in the printer's memory to the computer. In order to clear the printer's memory and reset
it to the 100 percent full level on the chips, either unplug the printer for 1 second, or turn
it off via the front power button and leave it off for 15 or more seconds.
How to remove the QuickConnect system from the printer
Clamp off the tubes before removing. The cartridges may drip slightly when removed
from the printer because they are filled with more ink than the sponge can retain. Keep
the cartridges above the level of the ink bags until you are able to plug the exit holes with
3M electrical tape. Please note the exit port area must be perfectly dry or the tape won't
stick.
14