EPSON Stylus CX6400
Environmental
Temperature
Operation
50 to 95 °F (10 to 35 °C)
Storage*
– 4 to 140 °F (– 20 to 60 °C)
1 month at 104 °F (40 °C)
Transit*
– 4 to 140 °F (– 20 to 60 °C)
120 hours at 140 °F (60 °C)
Humidity (without condensation)
Operation
20 to 80% RH
Storage*
5 to 85% RH
*
Stored in shipping container
Interface
Standard
Based on Universal Serial Bus
Specifications Revision 2.0, Universal
Serial Bus Device Class Definition for
Printing Devices version 1.1
Bit rate
480 Mbps (high speed device)
Data encoding
NRZI
Connector
USB Series B 2.0 (High Speed)
Recommended
cable length
6.6 feet (2 meters) or less
Safety Approvals
Safety standards
UL 60950, CSA C22.2 No. 60950
EMC
FCC part 15 subpart B class B
CSA C108.8 class B
Using the Security Lock
To prevent unauthorized use of your CX6400, you can
activate its security lock feature. The security lock requires you
to enter a PIN (Personal Identification Number) whenever
you turn on the CX6400. If you forget your PIN, you can still
regain access to your CX6400 by turning off the security lock;
see "Turning Off the Security Lock" for details.
Follow these steps to activate the security lock:
1. Make sure the CX6400 is connected to your computer.
Then press the P On button to turn on the CX6400.
2. Insert your Stylus CX6400 software CD-ROM in your
computer's CD-ROM or DVD drive.
®
3. Windows:
If you see the Software Installation screen,
click Exit. Open the SecurityLock Tool folder on your
CD-ROM, then double-click the program file located in
that folder.
EPSON Stylus CX6400
4 -
®
Macintosh:
The EPSON folder automatically opens (if it
doesn't, double-click the EPSON CD-ROM icon). Then
double-click the Security Lock icon.
You see this screen:
4. Make sure Security Lock On is selected and click OK.
5. At the confirmation screen, click OK again and close the
program. You have now enabled the Security Lock menu on
the CX6400.
6. On the control panel, press the Setup button, then use the
Select buttons to display Security Lock on the LCD
screen.
Press Setup . . .
7. Press the x Color button.
8. Press the button next to On (shown on the LCD screen).
9. Enter a 4-digit PIN. Be sure to write down the number so
you don't forget it.
10. Press the button next to OK on the LCD screen.
11. Turn off your CX6400. It is now locked.
When you turn it back on, it prompts you to enter your PIN.
You cannot use it without entering the PIN unless you run the
security lock program from your computer, as described in the
next section.
Turning Off the Security Lock
Follow these steps to turn off the security lock:
1. On the control panel, press the Setup button, then use the
Select buttons to display Security Lock on the LCD
screen.
2. Press the x Color button.
3. Press the button next to Off on the LCD screen.
4. Enter your 4-digit PIN.
10/03
Then press Select
Drukuj stronę