Epson FX-880 - Impact Printer Skrócona instrukcja obsługi - Strona 10

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Akcesoria do drukarek Epson FX-880 - Impact Printer. Epson FX-880 - Impact Printer 12 stron. Warranty statement
Również dla Epson FX-880 - Impact Printer: Arkusz specyfikacji (2 strony), Instrukcja instalacji (10 strony), Informacje o produkcie (17 strony), Skrócona instrukcja obsługi (16 strony), Podręcznik (11 strony), Specyfikacja (2 strony), Podręcznik zawierający ważne informacje (8 strony), Instrukcja montażu (8 strony), Ograniczona gwarancja (1 strony)

7. Use a pointed object, such as a ball point

pen, to guide the ribbon between the print

head and ribbon guide while you turn the

ribbon-tightening knob to help feed the

ribbon into place.

8. Slide the print head from side to side to

make sure it moves smoothly.

9. Install the paper tension unit by placing

it on the printer's mounting pegs and

lowering it into place. Press down on both

ends of the unit until it clicks into place.

10. Replace the printer cover.

Clearing Paper Jams

1. Press the Operate button to turn off the

printer.

2. Open the printer cover.

3. If continuous paper is jammed in the

printer, tear off the fresh supply at the

perforation nearest the paper entry slot.

4. Turn the knob on the left side of the printer

away from you to eject the remaining

paper.

Caution:

Always turn off the printer befor you use

the knob; otherwise the printer may be

damaged or the top-of-form or tear-off

position may be lost.

5. Remove any remaining pieces of paper. If

any paper is stuck where the printer ejects

it, gently pull the paper out of the printer.

6. Close the printer cover and press the

Operate button to turn on the printer.

Feed the ribbon into place.

Place the paper tension unit on the printer's

mounting pegs and lower it into place.

Tear off the fresh supply of continuous paper at the

perforation nearest the paper entry slot.