TomTom LINK 530 Instrukcja instalacji - Strona 19

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla System nawigacji samochodowej TomTom LINK 530. TomTom LINK 530 40 stron.

Note: The full strength of the strips will be reached after approximately 72 hours depending

on the temperature.

7. Insert the LINK 530 into the holder. Press gently until it clicks into place.

Attaching the holder using self-tapping screws

You can use two self-tapping screws to fix the holder to your vehicle.

Please refer to the list of

1/7 x 5/8 inches) are included in your product package.

1. Choose a flat surface for the LINK 530.

Remember, when the LINK 530 is in the holder, it must not be obstructed by metal objects.

2. Insert the two screws into the corresponding holes in the holder.

3. Tighten the screws.

4. Carefully place the LINK 530 in the holder until it clicks into place.

You can use two cable ties to fix the holder to your vehicle. Using cable ties might have an impact

on the accuracy of the driving event reporting if the device is not fixed properly.

Please refer to the list of

inches) are included in your product package.

1. Choose a position where the LINK 530 is not obstructed by metal objects when it is in the

holder.

2. Insert the cable ties into the corresponding holes in the holder.

3. Wrap the cable ties around the object where you want to place the holder.

what's in the

box, to check that the self-tapping screws (3.5 x 16 mm,

what's in the

box, to check that the cable ties (205 x 3.5 mm, 8 x 1/7