Epson LQ-1070+ Podręcznik z informacjami o produkcie - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik z informacjami o produkcie dla Akcesoria do drukarek Epson LQ-1070+. Epson LQ-1070+ 8 stron. Product support bulletin(s)
Również dla Epson LQ-1070+: Biuletyn wsparcia produktu (20 strony), Biuletyn wsparcia produktu (5 strony), Podręcznik z informacjami o produkcie (8 strony), Instrukcja instalacji (1 strony), Biuletyn wsparcia produktu (16 strony)

Drukuj stronę

L Q - 1 0 7 0 +

Interface timing

The figure below shows the timing for the parallel interface:

ACKNLG

Interface Cards

You can use optional interface boards to supplement your printer's

built-in parallel interface.

The Epson interfaces below are compatible with your printer:

Model Number

Option Specifications

Cut-sheet feeders

Dimensions and weight

Printer

Height

Single-bin

377 mm

(14.8 inches)

367 mm

(14.4 inches)

Note: Dimensions when mounted on the printer; includes printer

dimensions

Bin capacity

Single sheets:

Up to 50 sheets of 82-g/m* (22-lb) paper

Up to 150 sheets of 82-g/m* (22-lb) paper

Envelopes:

Up to 25 (plain bond)

Up to 30 (air mail)

LQ-1070+ - 6

Name

Serial interface card

32 KB serial interface card

32 KB parallel interface card

Eoson Talk interface card

Width

Depth

444mm

(24.0 inches)

(17.5 inches)

60Qmm

434mm

(17.1 inches)

(24.0 inches)

Paper:

Width

Length

Thickness

Paper storage conditions:

Environmental

Temperature:

Humidity (without condensation):

Note:

conditions.

Envelope printing is only available with the C806381 cut-sheet

feeder, at normal operating conditions.

Command Changes from ESC/P

New Commands

The following are new comman ds that have been added to the

ESC/P command set:

Set page length in defined unit

Select graphics mode

E S C ( G

Define unit

Set absolute vertical print position

0.75 kg

(1.65 lb)

Print data as characters

Set page format

(4.74 lb)

Assign character table

Set relative vertical print position

Print raster graphics

Select font by pitch and point

ESC X

Set horizontal motion index (HMI)

ESC C

Deleted Commands

The following commands are not supported on Epson ESC/P 2

printers:

Set vertical tabs in VFU channels

Select vertical tab channel

Select justification

7/20/93

Envelopes

single sheets

182 to 420 mm

(7.17 to 16.5 inches)

182 to 420 mm

165 to 241 mm

(7.1710 16.5 inches)

(6.50 to 9.49 inches)

210 to 305 mm

(8.27 to 12.00 inches)

(3.62 to 4.09 inches)

0.07 to 0.10 mm

(0.0028 to 0.0039 inches)

(0.0063 to 0.0205 inches)

45 to 91 g/m2

Temperature: 18" to 22°C (64' to 72OF)

Humidity: 40% to 60%

Operation: 5" to 35°C (41" to 95°F)

Storage: 30" to 60°C (-22" to 140°F)

15% to 80%

Operation:

Storage: 5% to 90%

24-Pin Printers