Epson P6000 - Multimedia Photo Viewer Biuletyn wsparcia produktu - Strona 10

Przeglądaj online lub pobierz pdf Biuletyn wsparcia produktu dla Akcesoria do drukarek Epson P6000 - Multimedia Photo Viewer. Epson P6000 - Multimedia Photo Viewer 28 stron. Surecolor p-series
Również dla Epson P6000 - Multimedia Photo Viewer: Biuletyn wsparcia produktu (17 strony), Broszura i specyfikacje (6 strony), Podstawowa instrukcja obsługi (29 strony), Instrukcja obsługi (46 strony), Instrukcje (2 strony)

After the firmware file has been copied to the memory card, insert the Compact Flash or SD

memory card into the viewer.

Press and hold down the "OK" and

keys while sliding the "POWER" switch as shown below.

Do not turn off the viewer or attempt to remove the battery or disconnect the AC

Warning:

adapter at any time during the firmware update.

When you see the EPSON logo name, release the OK and

keys; the main firmware update

will begin and take approximately 3.5 minutes to complete.

NOTE: The Sub CPU firmware update is not installed in this version. Do not be alarmed if the

Sub CPU firmware update says "not available...." Once the firmware update is completed you

should see this screen.

Power off the viewer and remove the Compact Flash or SD memory card. Then turn the viewer

back on. Note: Do not press any keys when turning on the unit.

Set the Date and Time if prompted.

On the Home screen, press the Menu key. Select [Settings], then [Delete all cache files].

Press OK. If you see a dialog box prompting you to connect the AC adapter, click OK. You will

then see a progress bar until the process is completed.

Open Settings from the Home screen and select Device Information. In Device Information

select Firmware Version. The new firmware version "02.51.0325-0110-0200-0123" will be

Page 4 of 5

PSB.2010.06.001