Changing Copy Settings
.
1
Menu Item
Setting Item
Copies
1 to 99
Reduce/Enlarge
Actual
Auto Fit Page
10 × 15 cm -> A4
A4 -> A5
Zoom In/Out
25% to 400%
Paper Type
Plain, Prem.Glossy, GlossyPhoto,
SemiGloss, Matte, PQIJ, Photo
Paper, Bright White, Iron On
A4, A5, 10 × 15 cm (4 × 6 in)
Paper Size
Quality
Draft, Text, Photo, Best Photo
Restoration
Off, On
Note:
The available menu items and settings will vary according to the copy layout selected.
Copy Density
1.
Press the Menu button.
2.
Select the Copy Density.
3.
Adjust the copy density, then Press the OK
button.
8
Copying
2
A4 -> 10 × 15 cm
A5 -> A4
Lighter
Darker
Cancel
OK
1. Select the Menu Item.
2. Select the Setting Item.
Description
Sets the amount of copies to make.
Copies in the actual size.
Copies in the reduced or enlarged size that fits the size of the paper.
Copies in the reduced or enlarged size by selecting the appropriate
selection (original document size -> copy result size).
Sets the percentage by which the image will be zoomed in or out
and copied.
Sets the type of paper on which to print.
See page 6 for detailed settings.
Sets the paper size to copy to.
Sets the quality of the copy to be made.
Use this function when copying faded photos to restore the image
quality.
Useful Information for Copying
Note for copying
❏ When you make a copy using a control panel
function, a moiré (cross-hatch) pattern may
appear on your printout. To eliminate the moiré,
change the reduce/enlarge ratio or shift the
position of the original document.
❏ The copied image may not have exactly the same
size as the original.
❏ Depending on the type of paper used, print
quality may decline in the top and bottom areas
of the printout, or these areas may be smeared.
❏ If this product runs out of paper while making
copies, be sure to load additional paper as soon
as possible. If left without paper for a long period
of time, the colors of the first copy made after
reloading may not accurately reflect those of the
original.
❏ If the LCD panel indicates low ink while you are
copying, you can either continue making copies
until the ink runs out, or stop making copies and
then replace the ink cartridge.
Drukuj stronę