Motorola ASTRO APX Q5 Skrócona instrukcja obsługi - Strona 3

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Dwukierunkowe radio Motorola ASTRO APX Q5. Motorola ASTRO APX Q5 44 stron. Control head mobile radio

Drukuj stronę
O5CH_QRG.book Page 3 Tuesday, September 3, 2013 12:39 PM
m
®
ASTRO
APX™
O5 Control Head Mobile Radio
Quick Reference Card
RF Energy Exposure and Product Safety Guide for
Mobile Two-Way Radios
ATTENTION!
This radio is restricted to Occupational use only. Before
using the radio, read the RF Energy Exposure and
Product Safety Guide for Mobile Two-Way Radios which
contains important operating instructions for safe usage
and RF energy awareness and control for Compliance
with applicable standards and Regulations.
Radio Controls
Volume Knob
Dim Button
Home Button
Power On/Off Button
Indicators
LED Indicators
Menu Entries
Menu Select Button
Accessory Port (Microphone)
Radio On/Off
Press the Power On/Off button to toggle the power on
or off.
Adjusting Volume
Turn the Volume Knob clockwise to increase volume or
counterclockwise to decrease the volume.
Selecting a Zone
>
<
1
or
to ZONE.
>
<
2
or
button until the desired zone is displayed.
H
3
Press
or the PTT button to confirm the selected
zone number.
Mode Knob
4
Press the PTT button to begin transmitting on the
Orange
displayed zone channel.
Button
_______
Selecting a Channel
>
1
Press and hold
to scroll to CHAN and press the
Menu Select button directly below CHAN. The
display shows the current zone and channel.
2
Rotate the Mode knob to the desired channel.
3
Press H or the PTT button to confirm the channel.
4
Press the PTT button to transmit on the displayed
Navigation
zone channel.
Button
Receiving and Transmitting
1
Take the microphone off hook.
2
Select zone/channel.
3
Listen for a transmission.
OR
Turn the Volume Knob.
OR
>
<
or
to MON then press the Menu Select button
directly below MON and listen for activity.
4
Adjust volume, if necessary.
5
Press the PTT button to transmit; release to receive.
Sending an Emergency Alarm
1
Press the Emergency button. A tone sounds and the
display alternates EMERGENCY and the home
display.
2
A dispatcher acknowledgment ACK RECEIVED
display follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm has been
received by the trunked system's central controller.
3
Press and hold the emergency button or the PTT
button to return to normal operation.
To exit emergency at any time, press and hold the
Emergency button.
English