Motorola CP180 Szczegółowa instrukcja serwisowa - Strona 27

Przeglądaj online lub pobierz pdf Szczegółowa instrukcja serwisowa dla Dwukierunkowe radio Motorola CP180. Motorola CP180 28 stron. Uhf2 (438-470mhz)
Również dla Motorola CP180: Podstawowa instrukcja obsługi (16 strony), Podstawowa instrukcja obsługi (16 strony), Podstawowa instrukcja obsługi (18 strony), Instrukcja instalacji Cps/Tuner (6 strony), Informacje o usłudze (46 strony), Informacje o usłudze (46 strony)

Motorola CP180 Szczegółowa instrukcja serwisowa
1.0

Recommended Test Tools

Table 3.1 lists the service aids recommended for working on the radio. While all of these items are
available from Motorola, most are standard workshop equipment items, and any equivalent item
capable of the same performance may be substituted for the item listed.
Motorola Part
No.
RLN4460
Portable Test Set
RLN4510
Battery Interface
RVN4191
Customer Programming Soft-
ware and Global Tuner - Soft-
ware on CD Rom
PMKN4004
Programming Test Cable
PMKN4003
Radio to Radio Cloning Cable
RLN4008
Radio Interface Box
5886564Z01
RF Adaptor
0180305K08
Shop Battery Eliminator
EPN4040
Wall-Mounted Power Supply
EPN4041
Wall-Mounted Power Supply
3080369B71 or
Computer Interface Cable
3080369B72
6686533Z01
Knob Remover/Chassis Opener
HKN9216
IBM Computer Interface Cable
RSX4043A
TORX Screwdriver
6680387A
T6 TORX bit
WADN4055A
Portable Soldering Station
6604008K01
0.4mm Replacement Tip
6604008K01
0.8mm Replacement Tip
0180386A82
Anti-static Grounding Kit
Table 3-1 Service Aids
Description
Application
Enables connection to the audio/accessory jack.
Allows switching for radio testing.
Regulates DC current and voltage between radio and
power supply.
Program customer option and channel data.
Connects radio to RIB (PLN4008).
Allows a radio to be duplicated from a master radio by
transferring programmed data from the master radio to
the other.
Enables communications between the radio and the
computer's serial communications adapter.
Adapts radio's antenna port to BNC cabling of test
equipment.
Interconnects radio to power supply.
Used to supply power to the RIB (UK).
Used to supply power to the RIB (Euro).
Use B72 for the IBM PC AT or newer (9-pin serial
port). Use B71 for older models (25-pin serial port).
Connects the computer's serial communications
adapter to the RIB (PLN4008).
Used to remove the front cover assembly.
Connection from computer to RIB.
Used to remove and tighten chassis screws.
Removable TORX screwdriver bit.
Digitally controlled soldering iron.
For WADN4055A Soldering iron.
For WADN4055A Soldering iron.
Used for all radio assembly/disassembly procedures.
Chapter 3
SERVICE AIDS