Epson EL 4S/33+ Specyfikacja - Strona 4

Przeglądaj online lub pobierz pdf Specyfikacja dla Pulpit Epson EL 4S/33+. Epson EL 4S/33+ 11 stron. Os/2 2.0 display drivers
Również dla Epson EL 4S/33+: Biuletyn wsparcia produktu (11 strony)

Drukuj stronę

Epson EL 4S/33+

System board components and connectors

Epson EL 4S/33+ - 4

Jumper Settings

Use J10 with the built-in VGA adapter only. When J10 is ON, 1024 x 768

mode is interlaced and 800 x 600 mode

OFF, 1024 x 768 is non-interlaced and refresh at 60Hz; 800 x 600

refreshes at 72Hz. (VG 460 x 480 refreshes at 60 Hz regardless of the J10

setting)

"'You can use MS-DOS to automatically reassign parallel and serial ports.

Check your MS-DOS manual for more information.

SIMM Installation

Your computer comes with 2MB or 4MB of memory on

SIMMs. You can increase the memory up to 16MB by

1MB, or 4MB SIMMs in the computer's four

installing 256KB,

SIMM sockets. The following table shows the possible SIMM

configurations; do not install memory in any other

configuration.

SIMM configuration

Use only 30-pin, fast-page mode SIMMs (preferably

tin-plated) that operate at an access speed of 70ns

(nanoseconds) or faster. Be sure all the SIMMs operate at the

same speed.

12/93

refreshes at 56Hz. When J1O is